All-in-one – Control Module with Lights.
$700.00
The Control and Light Module is an all-in-one unit designed for use on trucks and trailers where monitoring can be done from a single side. Often installed in the cab of the vehicle so drivers can monitor the load safely and removed from the elements.
Installation Instructions:
The Control and Light Module consist of the following:
- Control and Light Module
- 8 x 1⁄4 Airline
- 7/32 Hex Key
Mount the Control and Light Module with the adjustment dials facing sideways – left or right if mounted vertically. The Control and Light Module is to be mounted with the four corner bolts positioning it on a flat surface.
The Control and Light Module require a fused 12-volt power supply. A clean air supply is connected to the system with a 1⁄4 Airline (supplied) between the levelling valve and the air suspension bags. Once connected, check for any leaks.
The Control and Light Module can be mounted anywhere convenient keeping in mind that lights should be viewable by the loader man.
